Bathtub Reglazing: 5 Common Problems & How To Avoid Them In San Diego

After a challenging day, nothing compares to the feeling of taking a long, warm bath. This is the ideal approach to unwind your senses, revitalize your skin, and experience the calm you’ve longed for—complete with a nice book, a glass of your preferred champagne, and your go-to essential oils. Call us now at White Tub Refinishing for bathtub refinishing services. 

It could seem undesirable to unwind and enjoy a relaxing bath if your bathtub appears to be in poor condition. The good news is that professional reglazing makes it simple to give your old tub a fresh lease on life. 

The nicest thing about bathtub reglazing services is that you may get a brand-new-looking tub for a lot less money than you would pay for renovation, replacement, or remodeling. However, problems may still occur if they employ improper methods and subpar supplies. 

The following are some of the most typical bathtub reglazing issues to watch out for and prevent: 

Swirling 

When the air becomes trapped between different coating layers, bubbling can happen. It might also occur if the coating was not adequately allowed to cure or if the previous finish was not removed before resurfacing. 

Sticky Sensation 

When the coating has not properly cured, a newly finished bathtub may feel sticky to the touch. If this happens, avoid using the tub just yet because it might need to be resprayed. 

Fade 

If the refinish coating is blended incorrectly, applied too thinly, or both, your reglazed bathtub may start to fade. Your tub’s original surface will ultimately peek through. 

Peeling

If there is a chip on the surface of your reglazed bathtub, peeling may occur, which may cause the entire finish to become loose. This might also happen if the glaze wasn’t fully cured or the surface wasn’t adequately prepped. 

Chipping

The surface of your freshly reglazed bathtub can chip when your tub is subjected to a considerable deal of force, even though your tub has fully and properly cured. This frequently occurs when you unintentionally drop anything heavy into the bathtub. You can fix this by using a blending solvent or by getting in touch with your go-to expert tub refurbishing firm. 

What Are The Ways To Avoid Damaging Your Reglazed Bathtub?

Hire only the top bathtub refinishing company in your area to guarantee the caliber of the work and client satisfaction. To ensure everyone’s safety, make sure they cover your entire bathroom before beginning the project and make the space well-ventilated. 

The old finish on your bathtub should then be fully stripped off by the refinishers and sanded down. Then, each flaw and imperfection on the surface of your tubs, such as cracks, corrosion, and chips, must be repaired or treated in order to create a superior base for the new finish. Before applying a sealing coat, they must prime, reglaze, and finish. To thoroughly set and cure all materials, each coat needs to have enough time to dry. You can use your newly glazed tub for up to 10-15 years after following all of these instructions. 

Conclusion 

You can unwind and have a satisfying bath with a professionally reglazed bathtub. You may restore your bathtub to like-new condition on a budget with the help of a skilled bathtub reglazer. 

With our skilled bathtub refinishing in San Diego, you can give your bathtub a fresh look and feel. For a free estimate, get in touch with White Tub Refinishing!